Vulnerabilities

Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk versions 18.20.0 and prior, 20.5.0 and prior, and 21.0.0; as well as ceritifed-asterisk 18.9-cert5 and prior, the 'update' functionality of the PJSIP_HEADER dialplan function can exceed the available buffer space for storing the new value of a header. By doing so this can overwrite memory or cause a crash. This is not externally exploitable, unless dialplan is explicitly written to update a header based on data from an outside source. If the 'update' functionality is not used the vulnerability does not occur. A patch is available at commit a1ca0268254374b515fa5992f01340f7717113fa.

res_pjsip_t38 in Sangoma Asterisk 16.x before 16.16.2, 17.x before 17.9.3, and 18.x before 18.2.2, and Certified Asterisk before 16.8-cert7, allows an attacker to trigger a crash by sending an m=image line and zero port in a response to a T.38 re-invite initiated by Asterisk. This is a re-occurrence of the CVE-2019-15297 symptoms but not for exactly the same reason. The crash occurs because there is an append operation relative to the active topology, but this should instead be a replace operation.

An issue was discovered in Asterisk through 19.x and Certified Asterisk through 16.8-cert13. The func_odbc module provides possibly inadequate escaping functionality for backslash characters in SQL queries, resulting in user-provided data creating a broken SQL query or possibly a SQL injection. This is fixed in 16.25.2, 18.11.2, and 19.3.2, and 16.8-cert14.

An issue was discovered in Sangoma Asterisk 13.x before 13.38.3, 16.x before 16.19.1, 17.x before 17.9.4, and 18.x before 18.5.1, and Certified Asterisk before 16.8-cert10. If the IAX2 channel driver receives a packet that contains an unsupported media format, a crash can occur.

A stack-based buffer overflow in res_rtp_asterisk.c in Sangoma Asterisk before 16.16.1, 17.x before 17.9.2, and 18.x before 18.2.1 and Certified Asterisk before 16.8-cert6 allows an authenticated WebRTC client to cause an Asterisk crash by sending multiple hold/unhold requests in quick succession. This is caused by a signedness comparison mismatch.

Incorrect access controls in res_srtp.c in Sangoma Asterisk 13.38.1, 16.16.0, 17.9.1, and 18.2.0 and Certified Asterisk 16.8-cert5 allow a remote unauthenticated attacker to prematurely terminate secure calls by replaying SRTP packets.

An issue was discovered in res_pjsip_diversion.c in Sangoma Asterisk before 13.38.0, 14.x through 16.x before 16.15.0, 17.x before 17.9.0, and 18.x before 18.1.0. A crash can occur when a SIP message is received with a History-Info header that contains a tel-uri, or when a SIP 181 response is received that contains a tel-uri in the Diversion header.

A res_pjsip_session crash was discovered in Asterisk Open Source 13.x before 13.37.1, 16.x before 16.14.1, 17.x before 17.8.1, and 18.x before 18.0.1. and Certified Asterisk before 16.8-cert5. Upon receiving a new SIP Invite, Asterisk did not return the created dialog locked or referenced. This caused a gap between the creation of the dialog object, and its next use by the thread that created it. Depending on some off-nominal circumstances and timing, it was possible for another thread to free said dialog in this gap. Asterisk could then crash when the dialog object, or any of its dependent objects, were dereferenced or accessed next by the initial-creation thread. Note, however, that this crash can only occur when using a connection-oriented protocol (e.g., TCP or TLS, but not UDP) for SIP transport. Also, the remote client must be authenticated, or Asterisk must be configured for anonymous calling.

An issue was discovered in manager.c in Sangoma Asterisk through 13.x, 16.x, 17.x and Certified Asterisk 13.21 through 13.21-cert4. A remote authenticated Asterisk Manager Interface (AMI) user without system authorization could use a specially crafted Originate AMI request to execute arbitrary system commands.

main/translate.c in Sangoma Asterisk 13.28.0 and 16.5.0 allows a remote attacker to send a specific RTP packet during a call and cause a crash in a specific scenario.

An issue was discovered in Asterisk Open Source through 13.27.0, 14.x and 15.x through 15.7.2, and 16.x through 16.4.0, and Certified Asterisk through 13.21-cert3. A pointer dereference in chan_sip while handling SDP negotiation allows an attacker to crash Asterisk when handling an SDP answer to an outgoing T.38 re-invite. To exploit this vulnerability an attacker must cause the chan_sip module to send a T.38 re-invite request to them. Upon receipt, the attacker must send an SDP answer containing both a T.38 UDPTL stream and another media stream containing only a codec (which is not permitted according to the chan_sip configuration).

Buffer overflow in res_pjsip_messaging in Digium Asterisk versions 13.21-cert3, 13.27.0, 15.7.2, 16.4.0 and earlier allows remote authenticated users to crash Asterisk by sending a specially crafted SIP MESSAGE message.

asterisk 13.10.0 is affected by: denial of service issues in asterisk. The impact is: cause a denial of service (remote).

An Integer Signedness issue (for a return code) in the res_pjsip_sdp_rtp module in Digium Asterisk versions 15.7.1 and earlier and 16.1.1 and earlier allows remote authenticated users to crash Asterisk via a specially crafted SDP protocol violation.

Buffer overflow in DNS SRV and NAPTR lookups in Digium Asterisk 15.x before 15.6.2 and 16.x before 16.0.1 allows remote attackers to crash Asterisk via a specially crafted DNS SRV or NAPTR response, because a buffer size is supposed to match an expanded length but actually matches a compressed length.

There is a stack consumption vulnerability in the res_http_websocket.so module of Asterisk through 13.23.0, 14.7.x through 14.7.7, and 15.x through 15.6.0 and Certified Asterisk through 13.21-cert2. It allows an attacker to crash Asterisk via a specially crafted HTTP request to upgrade the connection to a websocket.

An issue was discovered in Asterisk Open Source 13.x before 13.21.1, 14.x before 14.7.7, and 15.x before 15.4.1 and Certified Asterisk 13.18-cert before 13.18-cert4 and 13.21-cert before 13.21-cert2. When endpoint specific ACL rules block a SIP request, they respond with a 403 forbidden. However, if an endpoint is not identified, then a 401 unauthorized response is sent. This vulnerability just discloses which requests hit a defined endpoint. The ACL rules cannot be bypassed to gain access to the disclosed endpoints.

A Buffer Overflow issue was discovered in Asterisk through 13.19.1, 14.x through 14.7.5, and 15.x through 15.2.1, and Certified Asterisk through 13.18-cert2. When processing a SUBSCRIBE request, the res_pjsip_pubsub module stores the accepted formats present in the Accept headers of the request. This code did not limit the number of headers it processed, despite having a fixed limit of 32. If more than 32 Accept headers were present, the code would write outside of its memory and cause a crash.

An issue was discovered in Asterisk 13.18.4 and older, 14.7.4 and older, 15.1.4 and older, and 13.18-cert1 and older. A select set of SIP messages create a dialog in Asterisk. Those SIP messages must contain a contact header. For those messages, if the header was not present and the PJSIP channel driver was used, Asterisk would crash. The severity of this vulnerability is somewhat mitigated if authentication is enabled. If authentication is enabled, a user would have to first be authorized before reaching the crash point.

A Remote Crash issue was discovered in Asterisk Open Source 13.x before 13.18.4, 14.x before 14.7.4, and 15.x before 15.1.4 and Certified Asterisk before 13.13-cert9. Certain compound RTCP packets cause a crash in the RTCP Stack.

An issue was discovered in chan_skinny.c in Asterisk Open Source 13.18.2 and older, 14.7.2 and older, and 15.1.2 and older, and Certified Asterisk 13.13-cert7 and older. If the chan_skinny (aka SCCP protocol) channel driver is flooded with certain requests, it can cause the asterisk process to use excessive amounts of virtual memory, eventually causing asterisk to stop processing requests of any kind.

A Buffer Overflow issue was discovered in Asterisk Open Source 13 before 13.18.1, 14 before 14.7.1, and 15 before 15.1.1 and Certified Asterisk 13.13 before 13.13-cert7. No size checking is done when setting the user field for Party B on a CDR. Thus, it is possible for someone to use an arbitrarily large string and write past the end of the user field storage buffer. NOTE: this is different from CVE-2017-7617, which was only about the Party A buffer.

In Asterisk 11.x before 11.25.3, 13.x before 13.17.2, and 14.x before 14.6.2 and Certified Asterisk 11.x before 11.6-cert18 and 13.x before 13.13-cert6, insufficient RTCP packet validation could allow reading stale buffer contents and when combined with the "nat" and "symmetric_rtp" options allow redirecting where Asterisk sends the next RTCP report.

An Improper Neutralization of Special Elements used in an OS Command issue was discovered in Digium Asterisk GUI 2.1.0 and prior. An OS command injection vulnerability has been identified that may allow the execution of arbitrary code on the system through the inclusion of OS commands in the URL request of the program.

In Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized command execution is possible. The app_minivm module has an "externnotify" program configuration option that is executed by the MinivmNotify dialplan application. The application uses the caller-id name and number as part of a built string passed to the OS shell for interpretation and execution. Since the caller-id name and number can come from an untrusted source, a crafted caller-id name or number allows an arbitrary shell command injection.

PJSIP, as used in Asterisk Open Source 13.x before 13.15.1 and 14.x before 14.4.1, Certified Asterisk 13.13 before 13.13-cert4, and other products, allows remote attackers to cause a denial of service (buffer overflow and application crash) via a SIP packet with a crafted CSeq header in conjunction with a Via header that lacks a branch parameter.

chain_sip in Asterisk Open Source 11.x before 11.23.1 and 13.x 13.11.1 and Certified Asterisk 11.6 before 11.6-cert15 and 13.8 before 13.8-cert3 allows remote attackers to cause a denial of service (port exhaustion).

Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chan_sip, the CDR dialplan function, and the AMI Monitor action.

An issue was discovered in Asterisk Open Source 13.12.x and 13.13.x before 13.13.1 and 14.x before 14.2.1. If an SDP offer or answer is received with the Opus codec and with the format parameters separated using a space the code responsible for parsing will recursively call itself until it crashes. This occurs as the code does not properly handle spaces separating the parameters. This does NOT require the endpoint to have Opus configured in Asterisk. This also does not require the endpoint to be authenticated. If guest is enabled for chan_sip or anonymous in chan_pjsip an SDP offer or answer is still processed and the crash occurs.

chan_sip in Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3, when the timert1 sip.conf configuration is set to a value greater than 1245, allows remote attackers to cause a denial of service (file descriptor consumption) via vectors related to large retransmit timeout values.

Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3 allow remote authenticated users to cause a denial of service (uninitialized pointer dereference and crash) via a zero length error correcting redundancy packet for a UDPTL FAX packet that is lost.