Vulnerabilities

Moby is an open source container framework. In Docker Engine prior to version 29.5.1, Docker Daemon versions 28.5.2 and prior, and Moby Daemon prior to version 2.0.0-beta.14, a race condition during docker cp mount setup allows a malicious container to redirect a bind mount target to an arbitrary host path, potentially overwriting host files or causing denial of service. This issue has been patched in Docker Engine version 29.5.1 and Moby Daemon version 2.0.0-beta.14.

The MLX inference backend in Docker Model Runner on macOS uses the MLX-LM library, which unconditionally imports and executes arbitrary Python files from model directories via the model_file configuration field in config.json. When a model's config.json specifies a model_file pointing to a Python file, MLX-LM uses importlib to load and execute it with no trust_remote_code gate or equivalent safety check. The MLX backend runs without sandboxing, resulting in arbitrary code execution on the Docker host as the Docker Desktop user. Any container on the Docker network can trigger this by calling the model-runner.docker.internal API to pull a malicious model from an attacker-controlled OCI registry and request inference.

Docker Model Runner (DMR) is software used to manage, run, and deploy AI models using Docker. Prior to version 1.1.25, Docker Model Runner contains an SSRF vulnerability in its OCI registry token exchange flow. When pulling a model, Model Runner follows the realm URL from the registry's WWW-Authenticate header without validating the scheme, hostname, or IP range. A malicious OCI registry can set the realm to an internal URL (e.g., http://127.0.0.1:3000/), causing Model Runner running on the host to make arbitrary GET requests to internal services and reflect the full response body back to the caller. Additionally, the token exchange mechanism can relay data from internal services back to the attacker-controlled registry via the Authorization: Bearer header. This issue has been patched in version 1.1.25. For Docker Desktop users, enabling Enhanced Container Isolation (ECI) blocks container access to Model Runner, preventing exploitation. However, if the Docker Model Runner is exposed to localhost over TCP in specific configurations, the vulnerability is still exploitable.

Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1.

Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-buildx.exe, etc.) that are executed when a victim user opens Docker Desktop or invokes Docker CLI plugin features, and allow privilege-escalation if the docker CLI is executed as a privileged user. This issue affects Docker CLI: through 29.1.5 and Windows binaries acting as a CLI-plugin manager using the github.com/docker/cli/cli-plugins/manager https://pkg.go.dev/github.com/docker/[email protected]+incompatible/cli-plugins/manager package, such as Docker Compose. This issue does not impact non-Windows binaries, and projects not using the plugin-manager code.

An out of bounds read vulnerability in the grpcfuse kernel module present in the Linux VM in Docker Desktop for Windows, Linux and macOS up to version 4.61.0 could allow a local attacker to cause an unspecified impact by writing to /proc/docker entries. The issue has been fixed in Docker Desktop 4.62.0 .

Docker Desktop diagnostics bundles were found to include expired Hub PATs in log output due to error object serialization. This poses a risk of leaking sensitive information in exported diagnostics, especially when access denied errors occurred.

MCP Gateway allows easy and secure running and deployment of MCP servers. In versions 0.27.0 and earlier, when MCP Gateway runs in sse or streaming transport mode, it is vulnerable to DNS rebinding. An attacker who can get a victim to visit a malicious website or be served a malicious advertisement can perform browser-based exploitation of MCP servers executing behind the gateway, including manipulating tools or other features exposed by those MCP servers. MCP Gateway is not affected when running in the default stdio mode, which does not listen on network ports. Version 0.28.0 fixes this issue.

A vulnerability in the update process of Docker Desktop for Windows versions prior to 4.41.0 could allow a local, low-privileged attacker to escalate privileges to SYSTEM. During an update, Docker Desktop attempts to delete files and subdirectories under the path C:\ProgramData\Docker\config with high privileges. However, this directory often does not exist by default, and C:\ProgramData\ allows normal users to create new directories. By creating a malicious Docker\config folder structure at this location, an attacker can force the privileged update process to delete or manipulate arbitrary system files, leading to Elevation of Privilege.

A remote code execution (RCE) vulnerability via crafted extension description/changelog could be abused by a malicious extension in Docker Desktop before 4.34.2.

In Docker Desktop before v4.29.0, an attacker who has gained access to the Docker Desktop VM through a container breakout can further escape to the host by passing extensions and dashboard related IPC messages. Docker Desktop v4.29.0 https://docs.docker.com/desktop/release-notes/#4290 fixes the issue on MacOS, Linux and Windows with Hyper-V backend. As exploitation requires "Allow only extensions distributed through the Docker Marketplace" to be disabled, Docker Desktop v4.31.0 https://docs.docker.com/desktop/release-notes/#4310 additionally changes the default configuration to enable this setting by default.

Docker Machine through 0.16.2 allows an attacker, who has control of a worker node, to provide crafted version data, which might potentially trick an administrator into performing an unsafe action (via escape sequence injection), or might have a data size that causes a denial of service to a bastion node. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Docker Desktop before 4.12.0 is vulnerable to RCE via query parameters in message-box route. This issue affects Docker Desktop: before 4.12.0.

Play With Docker < 0.0.2 has an insecure CAP_SYS_ADMIN privileged mode causing the docker container to escape.

Docker Desktop for Windows before 4.6.0 allows attackers to delete (or create) any file through the dockerBackendV2 windowscontainers/start API by controlling the pidfile field inside the DaemonJSON field in the WindowsContainerStartRequest class. This can indirectly lead to privilege escalation.

In Docker Desktop 4.17.x the Artifactory Integration falls back to sending registry credentials over plain HTTP if the HTTPS health check has failed. A targeted network sniffing attack can lead to a disclosure of sensitive information. Only users who have Access Experimental Features enabled and have logged in to a private registry are affected.

Play With Docker is a browser-based Docker playground. Versions 0.0.2 and prior are vulnerable to domain hijacking. Because CORS configuration was not correct, an attacker could use `play-with-docker.com` as an example and set the origin header in an http request as `evil-play-with-docker.com`. The domain would echo in response header, which successfully bypassed the CORS policy and retrieved basic user information. This issue has been fixed in commit ed82247c9ab7990ad76ec2bf1498c2b2830b6f1a. There are no known workarounds.

Docker Desktop before 4.17.0 allows an attacker to execute an arbitrary command inside a Dev Environments container during initialization by tricking a user to open a crafted malicious docker-desktop:// URL.

OS Command injection vulnerability in Mintzo Docker-Tester through 1.2.1 allows attackers to execute arbitrary commands via shell metacharacters in the 'ports' entry of a crafted docker-compose.yml file.

Docker Desktop 4.3.0 has Incorrect Access Control.

Docker Desktop installer on Windows in versions before 4.6.0 allows an attacker to overwrite any administrator writable files by creating a symlink in place of where the installer writes its log file. Starting from version 4.6.0, the Docker Desktop installer, when run elevated, will write its log files to a location not writable by non-administrator users.

Docker Desktop before 4.5.1 on Windows allows attackers to move arbitrary files. NOTE: this issue exists because of an incomplete fix for CVE-2022-23774.

Docker Desktop before 4.4.4 on Windows allows attackers to move arbitrary files.

Docker Desktop version 4.3.0 and 4.3.1 has a bug that may log sensitive information (access token or password) on the user's machine during login. This only affects users if they are on Docker Desktop 4.3.0, 4.3.1 and the user has logged in while on 4.3.0, 4.3.1. Gaining access to this data would require having access to the user’s local files.

Docker CLI is the command line interface for the docker container runtime. A bug was found in the Docker CLI where running `docker login my-private-registry.example.com` with a misconfigured configuration file (typically `~/.docker/config.json`) listing a `credsStore` or `credHelpers` that could not be executed would result in any provided credentials being sent to `registry-1.docker.io` rather than the intended private registry. This bug has been fixed in Docker CLI 20.10.9. Users should update to this version as soon as possible. For users unable to update ensure that any configured credsStore or credHelpers entries in the configuration file reference an installed credential helper that is executable and on the PATH.

Docker Desktop before 3.6.0 suffers from incorrect access control. If a low-privileged account is able to access the server running the Windows containers, it can lead to a full container compromise in both process isolation and Hyper-V isolation modes. This security issue leads an attacker with low privilege to read, write and possibly even execute code inside the containers.

rakibtg Docker Dashboard before 2021-02-28 allows command injection in backend/utilities/terminal.js via shell metacharacters in the command parameter of an API request. NOTE: this is NOT a Docker, Inc. product.

In Docker before versions 9.03.15, 20.10.3 there is a vulnerability involving the --userns-remap option in which access to remapped root allows privilege escalation to real root. When using "--userns-remap", if the root user in the remapped namespace has access to the host filesystem they can modify files under "/var/lib/docker/ " that cause writing files with extended privileges. Versions 20.10.3 and 19.03.15 contain patches that prevent privilege escalation from remapped user.

Docker Desktop Community before 2.5.0.0 on macOS mishandles certificate checking, leading to local privilege escalation.

util/binfmt_misc/check.go in Builder in Docker Engine before 19.03.9 calls os.OpenFile with a potentially unsafe qemu-check temporary pathname, constructed with an empty first argument in an ioutil.TempDir call.

The official memcached docker images before 1.5.11-alpine (Alpine specific) contain a blank password for a root user. System using the memcached docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

The official rabbitmq docker images before 3.7.13-beta.1-management-alpine (Alpine specific) contain a blank password for a root user. System using the rabbitmq docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

The official haproxy docker images before 1.8.18-alpine (Alpine specific) contain a blank password for a root user. System using the haproxy docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

The official adminer docker images before 4.7.0-fastcgi contain a blank password for a root user. System using the adminer docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.