Vulnerabilities

Various versions of Daktronics Controller Firmware could allow authenticated and unauthenticated remote users to escape the intended directory and enumerate arbitrary file system paths.

Ericsson Packet Core Controller (PCC) versions prior to 1.39 contain a vulnerability where an attacker sending a large volume of specially crafted messages may cause service degradation.

Ericsson Packet Core Gateway (PCG) versions prior to 1.30 contain an Improper Handling of Missing Values (CWE-230) vulnerability where an attacker continuously sending a specially crafted message can cause service degradation. The impact continues as long the attack persists but the system recovers from the crashes when the attack stops.

CodeChecker is an analyzer tooling, defect database and viewer extension for the Clang Static Analyzer and Clang Tidy. Authentication bypass occurs when the URL ends with Authentication with certain function calls. This bypass allows assigning arbitrary permission to any user existing in CodeChecker. This issue affects CodeChecker: through 6.27.3.

Ericsson Packet Core Controller (PCC) versions prior to 1.38 contain a vulnerability where an attacker sending a large volume of specially crafted messages may cause service degradation.

Ericsson Indoor Connect 8855 versions prior to 2025.Q3 contains a Cross-Site Scripting (XSS) vulnerability which, if exploited, can lead to unauthorized disclosure and modification of certain information.

Improper Validation of Array Index (CWE-129) in multiple protocol parser components in Packetbeat can lead Denial of Service via Input Data Manipulation (CAPEC-153). An attacker with the ability to send specially crafted, malformed network packets to a monitored network interface can trigger out-of-bounds read operations, resulting in application crashes or resource exhaustion. This requires the attacker to be positioned on the same network segment as the Packetbeat deployment or to control traffic routed to monitored interfaces.

Improper Validation of Array Index (CWE-129) in the PostgreSQL protocol parser in Packetbeat can lead Denial of Service via Input Data Manipulation (CAPEC-153). An attacker can send a specially crafted packet causing a Go runtime panic that terminates the Packetbeat process. This vulnerability requires the pgsql protocol to be explicitly enabled and configured to monitor traffic on the targeted port.

Improper Bounds Check (CWE-787) in Packetbeat can allow a remote unauthenticated attacker to exploit a Buffer Overflow (CAPEC-100) and reliably crash the application or cause significant resource exhaustion via a single crafted UDP packet with an invalid fragment sequence number.

Cybersecurity AI (CAI) is an open-source framework for building and deploying AI-powered offensive and defensive automation. Versions 0.5.9 and below are vulnerable to Command Injection through the run_ssh_command_with_credentials() function, which is available to AI agents. Only password and command inputs are escaped in run_ssh_command_with_credentials to prevent shell injection; while username, host and port values are injectable. This issue does not have a fix at the time of publication.

All-Dynamics Digital Signage System 2.0.2 contains a cross-site request forgery vulnerability that allows attackers to create administrative users without proper request validation. Attackers can craft a malicious web page that automatically submits forms to create a new user with global administrative privileges when a logged-in user visits the page.

Radiometrics VizAir is vulnerable to any remote attacker via access to the admin panel of the VizAir system without authentication. Once inside, the attacker can modify critical weather parameters such as wind shear alerts, inversion depth, and CAPE values, which are essential for accurate weather forecasting and flight safety. This unauthorized access could result in the disabling of vital alerts, causing hazardous conditions for aircraft, and manipulating runway assignments, which could result in mid-air conflicts or runway incursions.

CodeChecker is an analyzer tooling, defect database and viewer extension for the Clang Static Analyzer and Clang Tidy. CodeChecker versions up to 6.26.1 contain a buffer overflow vulnerability in the internal ldlogger library, which is executed by the CodeChecker log command. This issue affects CodeChecker: through 6.26.1.

The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE.

A vulnerability was determined in Sismics Teedy up to 1.11. This affects an unknown function of the file /api/file of the component API Endpoint. Executing a manipulation can lead to improper access controls. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Ericsson Network Manager (ENM) versions prior to ENM 25.1 GA contain a vulnerability, if exploited, can result in an escalation of privilege.

Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges.

PTZOptics and possibly other ValueHD-based pan-tilt-zoom cameras use hard-coded, default administrative credentials. The passwords can readily be cracked. Many cameras have SSH or telnet listening on all interfaces. The passwords cannot be changed by the user, nor can the SSH or telnet service be disabled by the user.

Stack-based buffer overflow in LoadOFF in bulletphysics bullet3 before 3.26 on all platforms allows remote attackers to execute arbitrary code via a crafted OFF file with an overlong initial token processed by the VHACD test utility or invoked indirectly through PyBullet's vhacd function.

A vulnerability classified as critical has been found in Eluktronics Control Center 5.23.51.41. Affected is an unknown function of the file \AiStoneService\MyControlCenter\Command of the component Powershell Script Handler. The manipulation leads to command injection. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A code execution vulnerability has been identified in the Robot Operating System (ROS) 'rosbag' tool, affecting ROS distributions Noetic Ninjemys and earlier. The vulnerability arises from the use of the eval() function to process unsanitized, user-supplied input in the 'rosbag filter' command. This flaw enables attackers to craft and execute arbitrary Python code.

The Free Booking Plugin for Hotels, Restaurants and Car Rentals – eaSYNC Booking plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.3.21 via the 'view_request_details' due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to view the details of any booking request. The vulnerability was partially patched in versions 1.3.18 and 1.3.21.

In the anode crate 0.1.0 for Rust, data races can occur in unlock in SpinLock.

The Free Booking Plugin for Hotels, Restaurants and Car Rentals WordPress plugin before 1.3.15 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in subscriber change them via a CSRF attack

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Israpil Textmetrics webtexttool allows Stored XSS.This issue affects Textmetrics: from n/a through <= 3.6.2.

GraphicsMagick before 8e56520 has a heap-based buffer over-read in ReadJXLImage in coders/jxl.c, related to an ImportViewPixelArea call.

A YAML deserialization vulnerability was found in the Robot Operating System (ROS) 'dynparam', a command-line tool for getting, setting, and deleting parameters of a dynamically configurable node, affecting ROS distributions Noetic and earlier. The issue is caused by the use of the yaml.load() function in the 'set' and 'get' verbs, and allows for the creation of arbitrary Python objects. Through this flaw, a local or remote user can craft and execute arbitrary Python code.