Vulnerabilities

A vulnerability was identified in FoundationAgents MetaGPT up to 0.8.1. This affects the function generate_thoughts of the file metagpt/strategy/tot.py of the component Tree-of-Thought Solver. The manipulation leads to code injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was determined in FoundationAgents MetaGPT up to 0.8.1. The affected element is the function Bash.run in the library metagpt/tools/libs/terminal.py. This manipulation causes os command injection. The attack is possible to be carried out remotely. The project was informed of the problem early through a pull request but has not reacted yet.

A non-default configuration in Sage DPW 2025_06_004 allows unauthenticated access to diagnostic endpoints within the Database Monitor feature, exposing sensitive information such as hashes and table names. This feature is disabled by default in all installations and never available in Sage DPW Cloud. It was forcibly disabled again in version 2025_06_003.

A vulnerability was found in Foundation Agents MetaGPT up to 0.8.1. This vulnerability affects unknown code of the file metagpt/actions/di/write_analysis_code.py of the component DataInterpreter. The manipulation results in injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Shopware is an open commerce platform. Prior to 6.6.10.15 and 6.7.8.1, a vulnerability in the Shopware app registration flow that could, under specific conditions, allow attackers to take over the communication channel between a shop and an app. The legacy app registration flow used HMAC‑based authentication without sufficiently binding a shop installation to its original domain. During re‑registration, the shop-url could be updated without proving control over the previously registered shop or domain. This made targeted hijacking of app communication feasible if an attacker possessed the relevant app‑side secret. By abusing app re‑registration, an attacker could redirect app traffic to an attacker‑controlled domain and potentially obtain API credentials intended for the legitimate shop. This vulnerability is fixed in 6.6.10.15 and 6.7.8.1.

Omega-PSIR is vulnerable to Reflected XSS via the lang parameter. An attacker can craft a malicious URL that, when opened, causes arbitrary JavaScript to execute in the victim’s browser. This issue was fixed in 4.6.7.

FroshAdminer is the Adminer plugin for Shopware Platform. Prior to 2.2.1, the Adminer route (/admin/adminer) was accessible without Shopware admin authentication. The route was configured with auth_required=false and performed no session validation, exposing the Adminer UI to unauthenticated users. This vulnerability is fixed in 2.2.1.

EGroupware is a Web based groupware server written in PHP. A SQL Injection vulnerability exists in the core components of EGroupware prior to versions 23.1.20260113 and 26.0.20260113, specifically in the `Nextmatch` filter processing. The flaw allows authenticated attackers to inject arbitrary SQL commands into the `WHERE` clause of database queries. This is achieved by exploiting a PHP type juggling issue where JSON decoding converts numeric strings into integers, bypassing the `is_int()` security check used by the application. Versions 23.1.20260113 and 26.0.20260113 patch the vulnerability.

Foundation Agents MetaGPT actionoutput_str_to_mapping Code Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foundation Agents MetaGPT. Authentication is not required to exploit this vulnerability. The specific flaw exists within the actionoutput_str_to_mapping function. The issue results from the lack of proper validation of a user-supplied string before using it to execute Python code. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-28124.

Phpwcms 1.9.30 contains a file upload vulnerability that allows authenticated attackers to upload malicious SVG files with embedded JavaScript. Attackers can upload crafted SVG payloads through the multiple file upload feature to potentially execute cross-site scripting attacks on the platform.

Shopware is an open commerce platform. From 6.7.0.0 to before 6.7.6.1, a regression of CVE-2023-2017 leads to an array and array crafted PHP Closure not checked being against allow list for the map(...) override. This vulnerability is fixed in 6.7.6.1.

Missing Authorization vulnerability in wpweb Follow My Blog Post follow-my-blog-post allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Follow My Blog Post: from n/a through <= 2.4.0.

Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in wpweb Follow My Blog Post follow-my-blog-post allows Retrieve Embedded Sensitive Data.This issue affects Follow My Blog Post: from n/a through <= 2.3.9.

Shopware is an open commerce platform. Versions 6.4.6.0 through 6.6.10.9 and 6.7.0.0 through 6.7.5.0 have a Reflected XSS vulnerability in AuthController.php. A request parameter from the login page URL is directly rendered within the Twig template of the Storefront login page without further processing or input validation. This allows direct code injection into the template via the URL parameter, waitTime, which lacks proper input validation. This issue is fixed in versions 6.6.10.10 and 6.7.5.1.

An Insecure Direct Object Reference (IDOR) in Sage DPW v2024_12_004 and below allows unauthorized attackers to access internal forms via sending a crafted GET request.

Incorrect access control in Sage DPW 2024_12_004 and earlier allows unauthorized attackers to access the built-in Database Monitor via a crafted request. The vendor has stated that the issue is fixed in 2025_06_000, released in June 2025.

A race condition vulnerability has been identified in Shopware's voucher system of Shopware v6.6.10.4 that allows attackers to bypass intended voucher restrictions and exceed usage limitations.

A stored cross-site scripting (XSS) vulnerability exists in the Shopware 6 installation interface at /recovery/install/database-configuration/. The c_database_schema field fails to properly sanitize user-supplied input before rendering it in the browser, allowing an attacker to inject malicious JavaScript. This vulnerability can be exploited via a Cross-Site Request Forgery (CSRF) attack due to the absence of CSRF protections on the POST request. An unauthenticated remote attacker can craft a malicious web page that, when visited by a victim, stores the payload persistently in the installation configuration. As a result, the payload executes whenever any user subsequently accesses the vulnerable installation page, leading to persistent client-side code execution.

Apwide Golive 10.2.0 Jira plugin allows Server-Side Request Forgery (SSRF) via the test webhook function.

An issue was discovered in eGroupWare 17.1.20190111. A cross-site scripting Reflected (XSS) vulnerability exists in calendar/freebusy.php, which allows unauthenticated remote attackers to inject arbitrary web script or HTML into the "user" HTTP/GET parameter, which reflects its input without sanitization.

The Portfolio for Elementor & Image Gallery | PowerFolio plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Custom JS Attributes of Plugin's widgets in all versions up to, and including, 3.2.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The issue was partially fixed in version 3.2.0 and fully fixed in version 3.2.1

The Magic Buttons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's magic-button shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on the 'icon' user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

A vulnerability classified as critical has been found in slackero phpwcms up to 1.9.45/1.10.8. Affected is the function is_file/getimagesize of the file image_resized.php. The manipulation of the argument imgfile leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.9.46 and 1.10.9 is able to address this issue. It is recommended to upgrade the affected component.

The Simple Nav Archives WordPress plugin through 2.1.3 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack

IPW Systems Metazo through 8.1.3 allows unauthenticated Remote Code Execution because smartyValidator.php enables the attacker to provide template expressions, aka Server-Side Template-Injection. All instances have been patched by the Supplier.

TCPWave DDI 11.34P1C2 allows Remote Code Execution via Unrestricted File Upload (combined with Path Traversal).

Cross-Site Request Forgery (CSRF) vulnerability in wpweb WooCommerce Social Login woo-social-login allows Cross Site Request Forgery.This issue affects WooCommerce Social Login: from n/a through < 2.8.3.

Shopware prior to version 6.5.8.13 is affected by a SQL injection vulnerability in the /api/search/order endpoint. NOTE: this issue exists because of a CVE-2024-22406 and CVE-2024-42357 regression.

Shopware is an open source e-commerce software platform. Prior to 6.6.10.3 or 6.5.8.17, the default settings for double-opt-in allow for mass unsolicited newsletter sign-ups without confirmation. Default settings are Newsletter: Double Opt-in set to active, Newsletter: Double opt-in for registered customers set to disabled, and Log-in & sign-up: Double opt-in on sign-up set to disabled. With these settings, anyone can register an account on the shop using any e-mail-address and then check the check-box in the account page to sign up for the newsletter. The recipient will receive two mails confirming registering and signing up for the newsletter, no confirmation link needed to be clicked for either. In the backend the recipient is set to “instantly active”. This vulnerability is fixed in 6.6.10.3 or 6.5.8.17.

Shopware is an open commerce platform. It's possible to pass long passwords that leads to Denial Of Service via forms in Storefront forms or Store-API. This vulnerability is fixed in 6.6.10.3 or 6.5.8.17. For older versions of 6.4, corresponding security measures are also available via a plugin. For the full range of functions, we recommend updating to the latest Shopware version.

The Registrations for the Events Calendar WordPress plugin before 2.13.4 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

PwnDoc is a penetration test reporting application. Prior to version 1.2.0, the backup restore functionality allows an administrator to import raw data into the database, including Path Traversal (`../`) sequences. This is problematic for the template update functionality as it uses the path from the database to write arbitrary content to, potentially overwriting source code to achieve Remote Code Execution. Any user with the `backups:create`, `backups:update` and `templates:update` permissions (only administrators by default) can write arbitrary content to anywhere on the filesystem. By overwriting source code, it is possible to achieve Remote Code Execution. Version 1.2.0 fixes the issue.