Vulnerabilities

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, the mod_verto HTTP request handler allocates a fixed 2 MiB buffer for a POST application/x-www-form-urlencoded body but accepts Content-Length up to just under 10 MiB. The body-read loop is bounded by Content-Length rather than the buffer size, producing an attacker-controlled heap overflow of up to ~8 MiB -- before the HTTP basic-auth check runs. This issue has been patched in version 1.11.1.

Cross-Site Request Forgery (CSRF) vulnerability in SwitchWP WP Client Reports.This issue affects WP Client Reports: from n/a through 1.0.22.

A flaw was found in Open vSwitch where multiple versions are vulnerable to crafted Geneve packets, which may result in a denial of service and invalid memory accesses. Triggering this issue requires that hardware offloading via the netlink path is enabled.

openvswitch 2.17.8 was discovered to contain a memory leak via the function xmalloc__ in openvswitch-2.17.8/lib/util.c.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.11, when handling DTLS-SRTP for media setup, FreeSWITCH is susceptible to Denial of Service due to a race condition in the hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. If an attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to the port on the FreeSWITCH server that is expecting packets from the caller, a DTLS error is generated. This results in the media session being torn down, which is followed by teardown at signaling (SIP) level too. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable FreeSWITCH servers for calls that rely on DTLS-SRTP. To address this vulnerability, upgrade FreeSWITCH to 1.10.11 which includes the security fix. The solution implemented is to drop all packets from addresses that have not been validated by an ICE check.

The WP Sessions Time Monitoring Full Automatic WordPress plugin before 1.0.9 does not sanitize the request URL or query parameters before using them in an SQL query, allowing unauthenticated attackers to extract sensitive data from the database via blind time based SQL injection techniques, or in some cases an error/union based technique.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in SwitchWP WP Client Reports plugin <= 1.0.16 versions.

Insecure Permissions vulnerability in Connectivity Standards Alliance Matter Official SDK v.1.1.0.0 , Nanoleaf Light strip v.3.5.10, Govee LED Strip v.3.00.42, switchBot Hub2 v.1.0-0.8, Phillips hue hub v.1.59.1959097030, and yeelight smart lamp v.1.12.69 allows a remote attacker to cause a denial of service via a crafted script to the KeySetRemove function.

A flaw was found in Open vSwitch that allows ICMPv6 Neighbor Advertisement packets between virtual machines to bypass OpenFlow rules. This issue may allow a local attacker to create specially crafted packets with a modified or spoofed target IP address field that can redirect ICMPv6 traffic to arbitrary IP addresses.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Jobin Jose WWM Social Share On Image Hover plugin <= 2.2 versions.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.10, FreeSWITCH allows remote users to trigger out of bounds write by offering an ICE candidate with unknown component ID. When an SDP is offered with any ICE candidates with an unknown component ID, FreeSWITCH will make an out of bounds write to its arrays. By abusing this vulnerability, an attacker is able to corrupt FreeSWITCH memory leading to an undefined behavior of the system or a crash of it. Version 1.10.10 contains a patch for this issue.

The WP User Switch plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.0.2. This is due to incorrect authentication checking in the 'wpus_allow_user_to_admin_bar_menu' function with the 'wpus_who_switch' cookie value. This makes it possible for authenticated attackers, with subscriber-level permissions and above, to log in as any existing user on the site, such as an administrator, if they have access to the username.

Switcher Client is a JavaScript SDK to work with Switcher API which is cloud-based Feature Flag. Unsanitized input flows into Strategy match operation (EXIST), where it is used to build a regular expression. This may result in a Regular expression Denial of Service attack (reDOS). This issue has been patched in version 3.1.4. As a workaround, avoid using Strategy settings that use REGEX in conjunction with EXIST and NOT_EXIST operations.

An integer underflow in Organization Specific TLV was found in various versions of OpenvSwitch.

The TSS (Tuple Space Search) algorithm in Open vSwitch 2.x through 2.17.2 and 3.0.0 allows remote attackers to cause a denial of service (delays of legitimate traffic) via crafted packet data that requires excessive evaluation time within the packet classification algorithm for the MegaFlow cache, aka a Tuple Space Explosion (TSE) attack.

A flaw was found in dpdk. This flaw allows a malicious vhost-user master to attach an unexpected number of fds as ancillary data to VHOST_USER_GET_INFLIGHT_FD / VHOST_USER_SET_INFLIGHT_FD messages that are not closed by the vhost-user slave. By sending such messages continuously, the vhost-user master exhausts available fd in the vhost-user slave process, leading to a denial of service.

A memory leak was found in Open vSwitch (OVS) during userspace IP fragmentation processing. An attacker could use this flaw to potentially exhaust available memory by keeping sending packet fragments.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, an attacker can perform a SIP digest leak attack against FreeSWITCH and receive the challenge response of a gateway configured on the FreeSWITCH server. This is done by challenging FreeSWITCH's SIP requests with the realm set to that of the gateway, thus forcing FreeSWITCH to respond with the challenge response which is based on the password of that targeted gateway. Abuse of this vulnerability allows attackers to potentially recover gateway passwords by performing a fast offline password cracking attack on the challenge response. The attacker does not require special network privileges, such as the ability to sniff the FreeSWITCH's network traffic, to exploit this issue. Instead, what is required for this attack to work is the ability to cause the victim server to send SIP request messages to the malicious party. Additionally, to exploit this issue, the attacker needs to specify the correct realm which might in some cases be considered secret. However, because many gateways are actually public, this information can easily be retrieved. The vulnerability appears to be due to the code which handles challenges in `sofia_reg.c`, `sofia_reg_handle_sip_r_challenge()` which does not check if the challenge is originating from the actual gateway. The lack of these checks allows arbitrary UACs (and gateways) to challenge any request sent by FreeSWITCH with the realm of the gateway being targeted. This issue is patched in version 10.10.7. Maintainers recommend that one should create an association between a SIP session for each gateway and its realm to make a check be put into place for this association when responding to challenges.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

A cross-site scripting (XSS) vulnerability in NSK User Agent String Switcher Service v0.3.5 allows attackers to execute arbitrary web scripts or HTML via a crafted payload in the user agent input field.

Open vSwitch (aka openvswitch) 2.11.0 through 2.15.0 has a use-after-free in decode_NXAST_RAW_ENCAP (called from ofpact_decode and ofpacts_decode) during the decoding of a RAW_ENCAP action.

A flaw was found in multiple versions of OpenvSwitch. Specially crafted LLDP packets can cause memory to be lost when allocating data to handle specific optional TLVs, potentially causing a denial of service. The highest threat from this vulnerability is to system availability.

A vulnerability was found in openvswitch. A limitation in the implementation of userspace packet parsing can allow a malicious user to send a specially crafted packet causing the resulting megaflow in the kernel to be too wide, potentially causing a denial of service. The highest threat from this vulnerability is to system availability.

In Autoswitch Python Virtualenv before version 0.16.0, a user who enters a directory with a malicious `.venv` file could run arbitrary code without any user interaction. This is fixed in version: 1.16.0

An issue was discovered in Big Switch Big Monitoring Fabric 6.2 through 6.2.4, 6.3 through 6.3.9, 7.0 through 7.0.3, and 7.1 through 7.1.3; Big Cloud Fabric 4.5 through 4.5.5, 4.7 through 4.7.7, 5.0 through 5.0.1, and 5.1 through 5.1.4; and Multi-Cloud Director through 1.1.0. A read-only user can access sensitive information via an API endpoint that reveals session cookies of authenticated administrators, leading to privilege escalation.

FreeSWITCH 1.6.10 through 1.10.1 has a default password in event_socket.conf.xml.

In Progress MOVEit Transfer 10.2 before 10.2.6 (2018.3), 11.0 before 11.0.4 (2019.0.4), and 11.1 before 11.1.3 (2019.1.3), multiple SQL Injection vulnerabilities have been found in the REST API that could allow an unauthenticated attacker to gain unauthorized access to the database. Depending on the database engine being used (MySQL, Microsoft SQL Server, or Azure SQL), an attacker may be able to infer information about the structure and contents of the database or may be able to alter the database.

MOVEit.DMZ.WebApi.dll in Progress MOVEit Transfer 2018 SP2 before 10.2.4, 2019 before 11.0.2, and 2019.1 before 11.1.1 allows an unauthenticated attacker to gain unauthorized access to the database. Depending on the database engine being used (MySQL, Microsoft SQL Server, or Azure SQL), an attacker may be able to infer information about the structure and contents of the database, or may be able to alter the database via the REST API, aka SQL Injection.

An issue was discovered in SSHServerAPI.dll in Progress ipswitch WS_FTP Server 2018 before 8.6.1. Attackers have the ability to abuse a path traversal vulnerability using the SCP protocol. Attackers who leverage this flaw could also obtain remote code execution by crafting a payload that abuses the SITE command feature.

FreeSWITCH through 1.8.2, when mod_xml_rpc is enabled, allows remote attackers to execute arbitrary commands via the api/system or txtapi/system (or api/bg_system or txtapi/bg_system) query string on TCP port 8080, as demonstrated by an api/system?calc URI. This can also be exploited via CSRF. Alternatively, the default password of works for the freeswitch account can sometimes be used.

A local privilege escalation vulnerability has been identified in the SwitchVPN client 2.1012.03 for macOS. Due to over-permissive configuration settings and a SUID binary, an attacker is able to execute arbitrary binaries as root.

An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6, affecting ofproto_rule_insert__ in ofproto/ofproto.c. During bundle commit, flows that are added in a bundle are applied to ofproto in order. If a flow cannot be added (e.g., the flow action is a go-to for a group id that does not exist), OvS tries to revert back all previous flows that were successfully applied from the same bundle. This is possible since OvS maintains list of old flows that were replaced by flows from the bundle. While reinserting old flows, OvS has an assertion failure due to a check on rule state != RULE_INITIALIZED. This would work for new flows, but for an old flow the rule state is RULE_REMOVED. The assertion failure causes an OvS crash.