Vulnerabilities

CVE-2026-19586 is a pre-authentication OS command injection flaw (CWE-78) in TP-Link Omada business gateways when they are configured to operate as an OpenVPN Server, caused by insufficient validation of client-supplied data during OpenVPN connection establishment. An unauthenticated remote attacker who can reach the VPN service can send specially crafted input during a connection attempt to influence backend command execution before authentication completes, gaining arbitrary command execution and potentially full compromise of the gateway, which typically sits at the network edge controlling routing and VPN for the whole site. Affected organizations are those running any of the listed Omada gateway models with the OpenVPN Server feature enabled and reachable by the attacker. TP-Link rates the issue critical (CVSS 4.0 base score 9.3). A public technical write-up/PoC exists and EPSS assigns a 5.7% probability of exploitation within 30 days (93rd percentile), but exploitation has not yet been confirmed in the wild and the flaw is not in CISA KEV.

Do: Update all listed Omada gateway models to the latest firmware per TP-Link's security advisory (fixed version numbers are not specified in the available data, so check the advisory for affected/fixed ranges). Until patched, disable OpenVPN Server or restrict access to the VPN service (e.g., firewall/ACL rules limiting UDP 1194 to trusted sources). Inventory your estate for these gateway models, confirm whether OpenVPN Server is enabled and reachable, and review VPN logs for anomalous connection attempts.

An unauthenticated denial-of-service vulnerability was identified in TP-Link TL-MR100 v3.2, TL-MR150 v3.2, TL-MR6400 v8.0 and Archer MR600 v2, due to improper handling of exceptional request conditions that may lead to a NULL pointer dereference. A remote attacker on an adjacent network can send a specially crated HTTP request to trigger a crash of the HTTP service process. Successful exploitation may cause the HTTP service to crash, making the web management interface and HTTP-dependent functionality temporarily unavailable.

An OS command injection vulnerability exists in the web management interface of Archer C20 v6 firmware when processing certain WAN-related configuration operations. An authenticated administrator may exploit insufficient input validation to execute arbitrary system commands, potentially resulting in full device compromise. Successful exploitation may allow arbitrary command execution with elevated privileges, compromising the confidentiality, integrity, and availability of the affected device and network traffic passing through it.

Tapo C100/C101 V5 contains a null pointer dereference vulnerability in the RTSP service. An attacker on the local network can send specially crafted requests that cause the service to dereference an invalid pointer, resulting in a service crash and device reboot. Successful exploitation can disrupt live video streaming functionality and cause a temporary denial-of-service condition.

An improper input validation vulnerability in the configuration service for processing encrypted credential data has been identified in Tapo C200 v5. An attacker can send oversized crypted ciphertext values that may trigger exception handling failures, due to insufficient validation, causing the affected device to crash or restart. Successful exploitation may temporarily disrupt HTTPS management and monitoring functionality, resulting in a denial-of-service (DoS) condition until the service recovers.

TP-Link Tapo C120 (v1) and Tapo C200 (v5) cameras contain an improper authentication vulnerability (CWE-287) in the login authentication verification module, rated high severity at CVSS 4.0 8.7. An attacker already present on the same local network as the camera (adjacent-network attack vector) can exploit weak validation of challenge parameters during the login handshake to bypass normal authentication and obtain administrative session tokens. With these tokens, the attacker can perform privileged management actions, gain unauthorized administrative access to the camera, and temporarily disrupt device services, causing a denial-of-service condition. All consumer and small-business deployments of these specific camera hardware/firmware versions are affected. A public proof-of-concept exists on GitHub, but EPSS is low (0.3% in 30 days) and the flaw is not in the CISA KEV catalog, so exploitation in the wild is not currently observed.

Do: Check the hardware/firmware version of any Tapo C120 or C200 units in your environment (Tapo app > device settings > firmware) and apply the latest firmware TP-Link publishes for these models as soon as a fix is available, monitoring TP-Link's security advisory page. Because exploitation requires local network access, place cameras on a segregated IoT/guest VLAN that cannot reach trusted internal segments, and verify camera accounts, bindings, and recorded footage for signs of unauthorized administrative access.

The web interface of the affected device relies on the HTTP referrer header as part of request validation. Requests containing empty Referer value, or omitting the Referer header entirely, may be accepted and processed due to insufficient validation logic. Successful exploitation may allow an adjacent attacker with access to the web management interface to obtain device configuration details and other sensitive information.

Tapo P110 v1 smart Wi-Fi Plug contains an improper boundary validation vulnerability in the handling of authenticated HTTP request bodies due to insufficient input validation before memory copy operations. This may lead to buffer overflow condition, causing the web service process to crash. Successful exploitation may cause the web service process to stop responding or restart, resulting in a denial-of-service condition.

A certification validation weakness exists in communication between affected Omada devices and cloud controllers. Certificate identity verification does not adequately validate that a presented certificate corresponds to the expected cloud controller hostname, which may allow certificate validation protections to be bypassed under specific conditions. Successful exploitation may allow interception or modification of communication between affected devices and cloud controllers.

Affected Omada devices rely on embedded certificates that are shared across deployments to establish trust between controllers and managed devices. An attacker who obtains the embedded certificates may be able to impersonate trusted controllers or devices and intercept affected communications.

An OS command injection vulnerability exists in the VPN module of TP-Link AXE75 V1 routers. This vulnerability allows an adjacent, authenticated attacker to execute arbitrary commands on the device by importing a specially crafted VPN client configuration file. The issue arises from improper filtering of special characters. Successful exploitation of this vulnerability may enable an attacker to gain full control of the affected device, potentially compromising configuration integrity, network security, and service availability.

Kasa EC71 v4 and EC70 v4 firmware contains a static cryptographic private key stored in a read-only filesystem that is shared across devices. An attacker with access to the firmware image can extract the embedded key. Successful exploitation may allow an unauthenticated attacker on the same network to use this key in the web management service, compromising the confidentiality of encrypted communications. This may enable passive decryption of traffic or active man-in-the-middle (MITM) attacks

An information disclosure vulnerability was identified in TP-Link Kasa EC70 v4 and EC71 v4 in the local discovery mechanism, which exposes sensitive geolocation information without requiring authentication. This issue allows an attacker on the same local network to retrieve geolocation-related data through crafted responses. The vulnerability impacts confidentiality only, with no evidence of integrity of availability impact.

TP-Link Deco M5 v1 uses a weak password hashing mechanism to store user credentials. An attacker who obtains the password hash through system compromise or privileged access could perform brute-force or dictionary attacks. Successful exploitation may result in disclosure of authentication credentials, enabling unauthorized access to device management functions, depending on the privileges associated with the recovered password. The primary security impact is loss of confidentiality.

An OS command injection vulnerability exists in the TR-069 / CWMP management interface of Archer VX1800v v1 due to insufficient input validation and sanitization of parameters, allowing crafted input to be executed as system-level commands. Exploitation requires specific conditions such as TR-069 being enabled and ability to influence ACS-delivered commands, compromise or control an ACS server. Successful exploitation may allow arbitrary command execution with root privileges, resulting in complete compromise of the device.

An authenticated stack-based buffer overflow vulnerability exists in the web management interface of TP-Link TL-WR841N v14. A remote authenticated attacker can send crafted HTTP requests to cause the embedded web server to overflow a stack buffer, resulting in a crash of the affected process. Successful exploitation results in a denial-of-service condition, causing the device to crash and automatically reboot.

A denial-of-service (DoS) vulnerability has been identified in Tapo C200 v3 in the network packet handling logic due to improper handling of IPv4 fragmented packets. An unauthenticated adjacent attacker can send crafted packets to cause excessive resource consumption, leading to instability of the device.Successful exploitation can remotely trigger a temporary denial-of-service condition, causing the camera to become unresponsive and resulting in intermittent loss of video monitoring and recording.

An authenticated OS command injection vulnerability exists in the BigPond Cable (BPA) WAN configuration module in TL-WR940N v6 due to improper sanitization of user input. An attacker with administrative access may exploit this issue to execute arbitrary system commands with elevated privileges.

An authenticated format string vulnerability exists in the ONVIF service of Tapo C110 v2 due to improper handling of user-controlled input. Externally controlled data is interpreted as a format string, which can be used to manipulate stack memory, including control flow data such as return addresses. A remote authenticated attacker may redirect execution flow to existing internal functions, triggering an unauthorized factory reset, leading to loss of configuration, deletion of stored credentials and service disruption.

A denial-of-service vulnerability exists in the RTSP server component of TP-Link Tapo C520WS v2 due to improper handling of syntactically invalid input. Crafted inputs can trigger a processing error, causing the RTSP service to enter non-responsive state. Successful exploitation may cause the RTSP in a denial-of-service condition.

TP-Link Tapo C200 v5 contains a stack-based buffer overflow flaw in RTSP authentication handling due to improper validation of Authorization header field lengths, which can be triggered by a crafted authentication request. Successful exploitation causes the affected RTSP core service process to crash and triggers an automatic system reboot, resulting in a denial of service (DoS) condition. This prevents legitimate users from accessing the camera’s live video stream or management interface until the service restarts.

A stored cross-site scripting (XSS) vulnerability has been identified in the web management interface of TP-Link's TL-SG108PE v5 switch due to improper sanitation of the SYSNAM configuration parameter during configuration file import. An attacker with administrator access can inject malicious script into the device configuration, which may be stored and executed in the administrator’s browser when the affected interface is viewed. Successful exploitation may allow session cookie theft, unauthorized configuration changes, or access to sensitive information exposed through the management interface.

TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. D100C is the chime delivered with your Tapo camera, and it is delivered with the following Tapo products: D130, D210, D235, D225, TD21, TDB21 and TD25

Due to improper enforcement of authentication rate-limiting on a debug SSH service in Archer C64 v1, the SSH service allows unlimited authentication attempts and uses the same credentials as the web interface. This enables an attacker to brute-force valid credentials via SSH. Successful exploitation could allow an attacker with adjacent network access to obtain administrative credentials through unrestricted authentication attempts and subsequently gain full administrative access to the device, impacting system confidentiality, integrity, and availability.

An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization. Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment.

An authentication logic vulnerability in multiple TP-Link range extenders allows an unauthenticated attacker on an adjacent network to manipulate a login parameter and reset the administrator password due to insufficient validation. Successful exploitation allows an attacker to obtain full administrative control of the affected device, potentially impacting on confidentiality, integrity, and availability.

In the web management interface of Archer AX72 (SG) v1, the network diagnostic feature improperly handles invalid user input, resulting in limited exposure of diagnostic command usage information. An authenticated attacker with administrative privileges could exploit this issue to confirm the presence of the diagnostic utility and view its valid command-line syntax and options. The exposed information is limited in scope and does not include sensitive system data.

TP-Link TL-WR720N wireless router contains a cross-site request forgery vulnerability that allows attackers to perform unauthorized administrative actions by crafting malicious web requests. Attackers can modify port forwarding rules via VirtualServerRpm.htm or change WiFi security settings via WlanSecurityRpm.htm by tricking authenticated users into visiting attacker-controlled pages.

TP-Link TL-WR841N v13 uses DES-CBC encryption in the TDDPv2 debug protocol with a cryptographic key derived from default web management credentials, making the key predictable if device is left in default configuration. A network-adjacent attacker can exploit this weakness to gain unauthorized access to the protocol, read debug data, modify certain device configuration values, and trigger device reboot, resulting in loss of integrity and a denial-of-service condition.

Inadequate Encryption Strength vulnerability in TP-Link Archer C7 v5 and v5.8 (uhttpd modules) allows Password Recovery Exploitation. The web interface encrypts the admin password client-side using RSA-1024 before sending it to the router during login. An adjacent attacker with the ability to intercept network traffic could potentially perform a brute-force or factorization attack against the 1024-bit RSA key to recover the plaintext administrator password, leading to unauthorized access and compromise of the device configuration. This issue affects Archer C7: through Build 20220715.

An OS command injection vulnerability in the OpenVPN module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute system commands when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow modification of configuration files, disclosure of sensitive information, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

An authentication bypass vulnerability within the HTTP handling of the DS configuration service in TP-Link Tapo C520WS v2.6 was identified, due to inconsistent parsing and authorization logic in JSON requests during authentication check. An unauthenticated attacker can append an authentication-exempt action to a request containing privileged DS do actions, bypassing authorization checks. Successful exploitation allows unauthenticated execution of restricted configuration actions, which may result in unauthorized modification of device state.