Vulnerabilities

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20.0 and prior to version 4.11.0, a vulnerability in OP-TEE’s subkey rollback protection allows the use of revoked or older subkey versions because the system fails to propagate versioning data during the Trusted Application (TA) loading process. In `core/crypto/signed_hdr.c`, the function `shdr_load_pub_key()` parses subkey headers but does not assign the `subkey_version` to the runtime `shdr_pub_key` structure. As a result, the `key->version` field remains at zero regardless of the version specified in the header. When `ree_fs_ta_open()` in `core/kernel/ree_fs_ta.c` calls `check_update_version()`, it passes this zeroed version to the rollback database. Because the database never receives a non-zero version to record, it never advances, effectively bypassing the rollback check and allowing TAs signed with downgraded subkey chains to load successfully. This impacts OP-TEE mainline configurations that utilize subkey-based signing chains for Trusted Application (TA) authentication. Version 4.11.0 contains a patch. No known workarounds are available.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In versions 3.13.0 through 4.10.0, missing checks in `entry_get_attribute_value()` in `ta/pkcs11/src/object.c` can lead to out-of-bounds read from the PKCS#11 TA heap or a crash. When chained with the OOB read, the PKCS#11 TA function `PKCS11_CMD_GET_ATTRIBUTE_VALUE` or `entry_get_attribute_value()` can, with a bad template parameter, be tricked into reading at most 7 bytes beyond the end of the template buffer and writing beyond the end of the template buffer with the content of an attribute value of a PKCS#11 object. Commits e031c4e562023fd9f199e39fd2e85797e4cbdca9, 16926d5a46934c46e6656246b4fc18385a246900, and 149e8d7ecc4ef8bb00ab4a37fd2ccede6d79e1ca contain patches and are anticipated to be part of version 4.11.0.

An issue was discovered in Mbed TLS versions from 2.19.0 up to 3.6.5, Mbed TLS 4.0.0. Insufficient protection of serialized SSL context or session structures allows an attacker who can modify the serialized structures to induce memory corruption, leading to arbitrary code execution. This is caused by Incorrect Use of Privileged APIs.

An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API.

An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys.

Mbed TLS before 3.6.6 and TF-PSA-Crypto before 1.1.0 misuse seeds in a Pseudo-Random Number Generator (PRNG).

In Mbed TLS 3.6.1 through 3.6.3 before 3.6.4, a timing discrepancy in block cipher padding removal allows an attacker to recover the plaintext when PKCS#7 padding mode is used.

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_import_public_key does not check that the input buffer is at least 4 bytes before reading a 32-bit field, allowing a possible out-of-bounds read on truncated input. Specifically, an out-of-bounds read in mbedtls_lms_import_public_key allows context-dependent attackers to trigger a crash or limited adjacent-memory disclosure by supplying a truncated LMS (Leighton-Micali Signature) public-key buffer under four bytes. An LMS public key starts with a 4-byte type indicator. The function mbedtls_lms_import_public_key reads this type indicator before validating the size of its input.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname.

Mbed TLS 3.5.x through 3.6.x before 3.6.2 has a buffer underrun in pkwrite when writing an opaque key pair

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

An issue was discovered in Trusted Firmware-M through 2.0.0. The lack of argument verification in the logging subsystem allows attackers to read sensitive data via the login function.

Improper input validation in ARM® Trusted Firmware used in AMD’s Zynq™ UltraScale+™) MPSoC/RFSoC may allow a privileged attacker to perform out of bound reads, potentially resulting in data leakage and denial of service.

In Mbed TLS 3.3.0 through 3.5.2 before 3.6.0, a malicious client can cause information disclosure or a denial of service because of a stack buffer over-read (of less than 256 bytes) in a TLS 1.3 server via a TLS 3.1 ClientHello.

An issue was discovered in Mbed TLS 2.18.0 through 2.28.x before 2.28.8 and 3.x before 3.6.0, and Mbed Crypto. The PSA Crypto API mishandles shared memory.

Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension().

An issue was discovered in Mbed TLS 3.5.1. There is persistent handshake denial if a client sends a TLS 1.3 ClientHello without extensions.

Mbed TLS 3.2.x through 3.4.x before 3.5 has a Buffer Overflow that can lead to remote Code execution.

Mbed TLS 2.x before 2.28.5 and 3.x before 3.5.0 has a Buffer Overflow.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20 and prior to version 3.22, `shdr_verify_signature` can make a double free. `shdr_verify_signature` used to verify a TA binary before it is loaded. To verify a signature of it, allocate a memory for RSA key. RSA key allocate function (`sw_crypto_acipher_alloc_rsa_public_key`) will try to allocate a memory (which is optee’s heap memory). RSA key is consist of exponent and modulus (represent as variable `e`, `n`) and it allocation is not atomic way, so it may succeed in `e` but fail in `n`. In this case sw_crypto_acipher_alloc_rsa_public_key` will free on `e` and return as it is failed but variable ‘e’ is remained as already freed memory address . `shdr_verify_signature` will free again that memory (which is `e`) even it is freed when it failed allocate RSA key. A patch is available in version 3.22. No known workarounds are available.

In Trusted Firmware-M through TF-Mv1.8.0, for platforms that integrate the CryptoCell accelerator, when the CryptoCell PSA Driver software Interface is selected, and the Authenticated Encryption with Associated Data Chacha20-Poly1305 algorithm is used, with the single-part verification function (defined during the build-time configuration phase) implemented with a dedicated function (i.e., not relying on usage of multipart functions), the buffer comparison during the verification of the authentication tag does not happen on the full 16 bytes but just on the first 4 bytes, thus leading to the possibility that unauthenticated payloads might be identified as authentic. This affects TF-Mv1.6.0, TF-Mv1.6.1, TF-Mv1.7.0, and TF-Mv1.8.

Use of a Broken or Risky Cryptographic Algorithm in the function mbedtls_mpi_exp_mod() in lignum.c in Mbed TLS Mbed TLS all versions before 3.0.0, 2.27.0 or 2.16.11 allows attackers with access to precise enough timing and memory access information (typically an untrusted operating system attacking a secure enclave such as SGX or the TrustZone secure world) to recover the private keys used in RSA.

Trusted Firmware-A through 2.8 has an out-of-bounds read in the X.509 parser for parsing boot certificates. This affects downstream use of get_ext and auth_nvctr. Attackers might be able to trigger dangerous read side effects or obtain sensitive information about microarchitectural state.

An unprotected memory-access operation in optee_os in TrustedFirmware Open Portable Trusted Execution Environment (OP-TEE) before 3.20 allows a physically proximate adversary to bypass signature verification and install malicious trusted applications via electromagnetic fault injections.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.

OP-TEE Trusted OS is the secure side implementation of OP-TEE project, a Trusted Execution Environment. Versions prior to 3.19.0, contain an Improper Validation of Array Index vulnerability. The function `cleanup_shm_refs()` is called by both `entry_invoke_command()` and `entry_open_session()`. The commands `OPTEE_MSG_CMD_OPEN_SESSION` and `OPTEE_MSG_CMD_INVOKE_COMMAND` can be executed from the normal world via an OP-TEE SMC. This function is not validating the `num_params` argument, which is only limited to `OPTEE_MSG_MAX_NUM_PARAMS` (127) in the function `get_cmd_buffer()`. Therefore, an attacker in the normal world can craft an SMC call that will cause out-of-bounds reading in `cleanup_shm_refs` and potentially freeing of fake-objects in the function `mobj_put()`. A normal-world attacker with permission to execute SMC instructions may exploit this flaw. Maintainers believe this problem permits local privilege escalation from the normal world to the secure world. Version 3.19.0 contains a fix for this issue. There are no known workarounds.