Zyxel firewall and VPN devices affected by critical flaws

The post-authentication command injection vulnerability in the CLI command of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker to execute some OS commands remotely.

CVE-2023-28771 is an unauthenticated OS command injection flaw (CWE-78) in Zyxel firewall firmware, caused by improper error message handling in the IKE packet decoder. A remote attacker triggers it by sending crafted packets to an affected device, with no credentials or user interaction required (CVSS 3.1: 9.8, network vector, low complexity). Successful exploitation lets the attacker execute operating-system commands on the firewall, which typically means full device compromise of these perimeter/VPN gateway appliances. Organizations running Zyxel ZyWALL/USG, VPN, USG FLEX, or ATP series firewalls on the affected firmware ranges are exposed, especially where IKE/VPN traffic is reachable from the internet. Exploitation is confirmed in the wild: the flaw was added to CISA's KEV on 2023-05-31, carries a 99.3% EPSS score (100th percentile), is reportedly used by DDoS botnets, and was reportedly exploited in the May 2023 coordinated attacks against nearly two dozen Danish energy companies.

Do: Apply Zyxel's patched firmware to all affected devices per the vendor advisory - releases newer than 4.73 for ZyWALL/USG and newer than 5.35 for ATP, USG FLEX, and VPN series - prioritizing internet-facing and VPN gateway appliances, as this is a KEV required-action vulnerability. Where immediate patching is not possible, restrict IKE traffic (UDP 500/4500) to trusted peers or disable unneeded IPsec VPN termination. After patching, review device logs and configurations for signs of command execution or unexpected changes, given confirmed botnet and targeted-attack use.

CVE-2023-33010 is a buffer overflow (CWE-120) in the ID processing function of Zyxel's firewall firmware that is triggered when an affected device processes crafted input sent by an unauthenticated attacker. Successful exploitation can cause denial-of-service conditions and, more seriously, allow remote code execution on the firewall itself, giving an attacker a foothold at the network perimeter. The flaw affects multiple Zyxel firewall lines widely used by small and mid-sized organizations, including ATP, USG FLEX, USG FLEX 50(W), USG20(W)-VPN, VPN, and legacy ZyWALL/USG models. The vulnerability has been added to CISA's Known Exploited Vulnerabilities catalog (added 2023-06-05), indicating it is being exploited in the wild, though no public proof-of-concept is known and ransomware association is unconfirmed. EPSS puts the 30-day exploitation probability at 28.8% (98th percentile), and no CVSS score has been published yet.

Do: Apply the updated firmware for your specific model per Zyxel's security advisory, since the CISA required action is to patch per vendor instructions. Until patched, restrict or disable WAN-side access to the firewall's management/ID processing interfaces and monitor devices for signs of compromise such as unexpected reboots or crashes. Inventory all ATP, USG FLEX (including 50(W)), USG20(W)-VPN, VPN, and ZyWALL/USG units to confirm none remain unpatched.