Zyxel shares guidance for protecting devices from ongoing attacks
Vulnerabilities mentionedAll →
| CVE | Vulnerability | CVSS | EPSS | Flags | Affected | Exposure | Published |
|---|---|---|---|---|---|---|---|
| CVE-2023-28771 | Unauthenticated OS Command Injection in Zyxel ATP, USG FLEX, VPN, and ZyWALL Firewalls CVE-2023-28771 is an unauthenticated OS command injection flaw (CWE-78) in Zyxel firewall firmware, caused by improper error message handling in the IKE packet decoder. A remote attacker triggers it by sending crafted packets to an affected device, with no credentials or user interaction required (CVSS 3.1: 9.8, network vector, low complexity). Successful exploitation lets the attacker execute operating-system commands on the firewall, which typically means full device compromise of these perimeter/VPN gateway appliances. Organizations running Zyxel ZyWALL/USG, VPN, USG FLEX, or ATP series firewalls on the affected firmware ranges are exposed, especially where IKE/VPN traffic is reachable from the internet. Exploitation is confirmed in the wild: the flaw was added to CISA's KEV on 2023-05-31, carries a 99.3% EPSS score (100th percentile), is reportedly used by DDoS botnets, and was reportedly exploited in the May 2023 coordinated attacks against nearly two dozen Danish energy companies. Do: Apply Zyxel's patched firmware to all affected devices per the vendor advisory - releases newer than 4.73 for ZyWALL/USG and newer than 5.35 for ATP, USG FLEX, and VPN series - prioritizing internet-facing and VPN gateway appliances, as this is a KEV required-action vulnerability. Where immediate patching is not possible, restrict IKE traffic (UDP 500/4500) to trusted peers or disable unneeded IPsec VPN termination. After patching, review device logs and configurations for signs of command execution or unexpected changes, given confirmed botnet and targeted-attack use. | 9.8 | 99% | KEV PoC |
| largetens of thousands of internet-exposed Zyxel firewall/VPN gateways (order of 10,000-100,000 devices/sites); estimate | |
| CVE-2023-33010 +1 in the same advisory: …33009 | Buffer Overflow in Zyxel ATP, USG FLEX, VPN and ZyWALL/USG Firewalls Enables RCE CVE-2023-33010 is a buffer overflow (CWE-120) in the ID processing function of Zyxel's firewall firmware that is triggered when an affected device processes crafted input sent by an unauthenticated attacker. Successful exploitation can cause denial-of-service conditions and, more seriously, allow remote code execution on the firewall itself, giving an attacker a foothold at the network perimeter. The flaw affects multiple Zyxel firewall lines widely used by small and mid-sized organizations, including ATP, USG FLEX, USG FLEX 50(W), USG20(W)-VPN, VPN, and legacy ZyWALL/USG models. The vulnerability has been added to CISA's Known Exploited Vulnerabilities catalog (added 2023-06-05), indicating it is being exploited in the wild, though no public proof-of-concept is known and ransomware association is unconfirmed. EPSS puts the 30-day exploitation probability at 28.8% (98th percentile), and no CVSS score has been published yet. Do: Apply the updated firmware for your specific model per Zyxel's security advisory, since the CISA required action is to patch per vendor instructions. Until patched, restrict or disable WAN-side access to the firewall's management/ID processing interfaces and monitor devices for signs of compromise such as unexpected reboots or crashes. Inventory all ATP, USG FLEX (including 50(W)), USG20(W)-VPN, VPN, and ZyWALL/USG units to confirm none remain unpatched. | 9.8 | 29% | KEV |
| large≈tens of thousands of internet-exposed devices from a combined installed base likely well over 100,000 across these firewall lines |
Full article466 words · extracted from securityaffairs.com · click to collapse

Zyxel has published guidance for protecting firewall and VPN devices from the ongoing attacks recently discovered.
Zyxel has published guidance for protecting firewall and VPN devices from ongoing attacks exploiting CVE-2023-28771, CVE-2023-33009, and CVE-2023-33010 vulnerabilities.
“Simultaneously, Zyxel has been urging users to install the patches through multiple channels, including issuing several security advisory newsletters to registered users and advisory subscribers; notifying users to upgrade via the Web GUI’s push notification for on-premises devices; and enforcing scheduled firmware upgrades for cloud-based devices that haven’t yet done so.” reads the guidance published by the vendor.
Threat actors are actively attempting to exploit the command injection vulnerability CVE-2023-28771 impacting Zyxel firewalls. Their objective is to leverage this vulnerability to deploy and install malware on the affected systems. US CISA added the vulnerability to its Known Exploited Vulnerability to Catalog based on evidence of active exploitation.
In late April, Zyxel addressed the critical vulnerability CVE-2023-28771 (CVSS score 9.8) in its firewall devices. The company promptly advised customers to install the provided patches in order to mitigate the vulnerability.
The vulnerability is being actively exploited to recruit vulnerable devices in a Mirai-like botnet.
The other two issues, tracked as CVE-2023-33009 and CVE-2023-33010, are critical buffer overflow vulnerabilities. A remote, unauthenticated attacker can can trigger the flaws to cause a denial-of-service (DoS) condition and remote code execution on vulnerable devices.
The company states that devices under attack become unresponsive and their Web GUI or SSH management interface are not reachable.
Symptoms of attacks include network interruptions and VPN connections disconnecting.
The following table includes products and firmware versions affected by these flaws and the latest firmware updates addressing the issues.
| Affected series | Affected versions for CVE 2023 28771 | Affected versions for CVE 2023 33009/CVE 2023 33010 | Latest firmware |
|---|---|---|---|
| ATP | ZLD V4.60 to V5.35 | ZLD V4.32 to V5.36 Patch 1 | ZLD V5.36 Patch 2 |
| USG FLEX | ZLD V4.60 to V5.35 | ZLD V4.50 to V5.36 Patch 1 | ZLD V5.36 Patch 2 |
| USG FLEX50(W) / USG20(W)-VPN | N/A | ZLD V4.25 to V5.36 Patch 1 | ZLD V5.36 Patch 2 |
| VPN | ZLD V4.60 to V5.35 | ZLD V4.30 to V5.36 Patch 1 | ZLD V5.36 Patch 2 |
| ZyWALL/USG | ZLD V4.60 to V4.73 | ZLD V4.25 to V4.73 Patch 1 | ZLD V4.73 Patch 2 |
Zyxel also provides mitigation measures for these vulnerabilities such as disabling HTTP/HTTPS services from WAN (Wide Area Network).
If admins need to manage devices from the WAN side, enable Policy Control and add rules to only allow access from trusted source IP addresses. The guidance also recommends enabling GeoIP filtering to only allow access from trusted locations.
Zyxel also recommends disabling UDP Port 500 and Port 4500 if there is no requirement for the IPSec VPN function
Follow me on Twitter: @securityaffairs and Facebook and Mastodon
(SecurityAffairs – hacking, firewall)
Text extracted automatically; images, tables and formatting may be missing. Original: https://securityaffairs.com/147030/security/zyxel-guidance-firewall-hardening.html