RTF Exploit Installs Italian RAT: uWarrior

Unit 42 researchers have observed a new Remote Access Tool (RAT) constructed by an unknown actor of Italian origin. This RAT, referred to as uWarrior because of embedded PDB strings, has been previously described by an independent researcher who noted a potentially unknown exploit being used against Microsoft Office.

Initial research into the exploit by Unit 42 indicates that this actor has opted to include multiple exploits. One is CVE-2012-1856, reinvigorated with a novel ROP chain to bypass ASLR and deliver the uWarrior payload. The other appears to be CVE-2015-1770. The malware itself is a fully featured RAT, which uses a compressed, (optionally) encrypted, raw TCP socket and binary message protocol for command and control communications.

During the course of our research, it became evident that this actor had not built uWarrior from scratch, but rather opted to borrow components from several off-the-shelf tools. Linkages between older RATs are explored later in this blog.

RTF Exploitation and ASLR Bypass

The weaponized RTF document used by this actor contains multiple OLE objects. In this instance, we see two different exploits, as well as two methods of bypassing ASLR exploit mitigations. The first method was published in 2014 by Parvez Anwar. The method he describes involves creating an embedded OLE object which contains a ProgID for “otkloadr.WRAssembly.1”. This causes MSVCR71.DLL to be loaded, a library which is not compiled with /DYNAMICBASE.

When using OLE to perform exploitation, ActiveX objects can be used to cite specific CLSID values. This is useful to an attacker as many of these CLSID values map to DLLs on the system. Attackers can deliberately use this to load any DLL they desire into the affected application so long as it maps to a valid CLSID.

This method was actually described at Black Hat USA 2015 in the talk: “Attacking Interoperability: An OLE Edition” by researchers Haifei Li and Bing Sun of Intel Security.

As a result of this method, it is possible for the attacker to force the loading of less secure libraries which were not compiled with the /DYNAMICBASE compiler flag (enables ASLR at compile time), or other libraries which further enable the corruption and manipulation of memory.

From the RTF document, we can use oletools to extract each OLE object. Thus far, we have encountered two weaponized RTF documents.

Interestingly, both documents contained identical OLE objects:

7ff9ff29b79d0eb38813bfa0b0bb1c5b116d1f9e5468ae52674bb443468658d9	object_00000020.bin
7f29f2dc8b60c0e5a22575d9c76fd9c3d39604d1acf5cb4d938a63095c61a72e	object_000000E6.bin
fe80d59686806afe3dc48f73d54b577558a7c871da17d08d937c5d7b3564e07b	object_000187A1.bin
70ea7ef3bf9966c3297a4e78024e3083013558670d051c2ca3095e2588a576d8	object_0002802C.bin

Closer examination of each of the OLE objects reveals that two of them have compressed zip files embedded in them at an offset of 1577 bytes:

Once carved and unzipped, we can see a small directory structure. Within the word/activex directory, we can see ActiveX binaries, as well as XML documents associated with them. The XML files themselves are mostly identical; duplicates of only two particularly unique ones. The contents of these two files are as follows:

From this we can see that ActiveX objects are calling specific CLSIDs. From this, two relatively known exploits can likely be identified, based on both payloads, and the CLSIDs used.

CLSID	Target Component	Patch	Associated Vulnerability
1EFB6596-857C-11D1-B16A-00C0F0283628	MSCOMCTL TabStrip control	MS12-060	CVE-2012-1856
CDDBCC7C-BE18-4A58-9CBF-D62A012272CE	OSF.DLL (memory corruption in ActiveX use cases)	MS15-059	CVE-2015-1770

As a result of MSVCR71 being loaded via Parvez Anwar’s method, it would appear that exploitation of CVE-2012-1856 could be re-invigorated by the use of ROP gadgets (now with non-randomized gadget addresses) located within its address space, making a VirtualProtect() call and stage 2 shellcode trivial. At this time it is unclear whether the original patch was designed to correct memory mismanagement of the affected TabStrip control, or if the components to load it were simply changed to operate with ASLR enabled to limit the vectors of introducing arbitrary code. At any rate, the ActiveX binary from OLE object 0x000000E6 has the following approximate structure:

Figure 1: We can see the end of the RET heap spray leading into a ROP chain and stage 1 shellcode

Keeping in mind that (of course) the addresses are backwards due to little endian byte ordering, we can observe the following ROP chain after the ret gadget 0x7c342404, and prior to actual shellcode:

In the OLE object 0x0002802C, there are more XML files containing the CVE-2012-1856 CLSID, however 2 files (activeX39.xml and activeX40.xml), contain the CLSID for CVE-2015-1770, which does in fact, cause OSF.DLL to load. Examining the ActiveX binary reveals a not-too-dissimilar structure to the first one:

Figure 2: We can observe the end of the 0xCC heap spray, the 0x08 and 0x41 memory markers as well as stage 1 code here.

Stage 2 shellcode in both cases is decoded and inserted from memory (rather than statically included in a file) and triggers a download of the uWarrior RAT itself. When executing this payload on systems with 64-bit version of Office, things may not quite go as the author intended. For example, on 64-bit systems, msvcr71.dll is part of the SysWOW64 libraries and not available in the Office15 native add-ons folder. Instead, MSVCR100.dll is loaded for those calls and the 64-bit edition of otkloadr.WRAssembly.1 is loaded as well. Furthermore this breaks many of the hard-coded addresses and ROP gadgets, landing at the following error:

The address 0x7c38bd50 is a reference back into the aforementioned, msvcr71 library which is not in memory.

It is important to note that analysis of the exploitation itself is on-going and many researchers around the industry have suggested differing vulnerabilities as a root cause; however, conclusive evidence is lacking and the combination of methods and affected code is both new and complex.

uWarrior Malware Analysis

After successful exploitation, a payload is saved to the system at “%AppData%\Roaming\TEST\WindowsUpdate.exe” and executed. The WindowsUpdate.exe application contains several artifacts that suggest that the malware author calls this Trojan uWarrior, one of which is the following debugging symbol path found in the sample:

D:\1-Visual Basic Proggetti\UtilityWarrior\UtilityWarrior\obj\Debug\UtilityWarrior.pdb

uWarrior begins by copying itself to a second location, which in this case was “%AppData%\Local\svchost.exe” and saves the path to this copied executable within the following file:

%AppData%\Roaming\warriors.dat

During execution, uWarrior logs its activities to a file located at “%AppData%\Local\Temp\bootloader.dec”, however, our team is aware of other uWarrior samples saving their logs to “C:\bootloader.dec” instead. We found that uWarrior has a configuration that follows the structure:

The settings structure found in this sample of uWarrior has the domain “login.collegefan.org” set as the C2 host, and 2020 for the communications port. When communicating with the C2 server, the uWarrior Trojan uses AES to encrypt the data sent to the C2, using the key and initialization vector (IV) seen in Figure 3.

uWarrior will receive commands from the C2 using this communication channel and will process the commands using a command handler.

Figure 3 AES Encryption Key and IV used by uWarrior

The C2 will send numerical values that the uWarrior Trojan will parse to determine which command to carry out. Fortunately, the author of uWarrior included an enumeration (a data type in programming that maps a constant value to a defined name), which applies a human-readable string to each command's numerical value. This enumeration makes analyzing the commands available within the malware much easier. The functionality within many of the commands are handled by a helper DLL that the uWarrior will extract from its resource section named Windows_Update.UtilityWarrior.dll and load.

Unit 42 analyzed the command handler to determine uWarrior’s capabilities and found the following commands available:

EnumValue	Command	Description
10	Handshake	Instructs the Trojan to use a new key and initialization vector (IV) to encrypt network communications. The Trojan will then creates a thread that it will use in an attempt to establish communications using the new key.
14	ShutdownClient	Exits the current instance of the Trojan.
15	RestartClient	Restarts the Trojan and exits the current instance of the Trojan.
16	UninstallClient	Creates a batch script with a temporary filename that deletes the Trojan and then the batch script. The script contains the following::Repeat:DEL \"<executable path>\"if exists \"<executable path>\" goto RepeatDEL \"<batch script path>\""One interesting thing to note is that there is a flag called "BlueScreenOnTermination", which if set in the configuration will set the Trojan's process to be system critical by calling the SetProcessIsCritical function. After the batch script deletes the files, the Trojan exits itself and causes a Windows error due to the fact the process was system critical.
17	RestartPC	Restarts the system using the command line "shutdown.exe -r -f".
18	ClosePC	Shuts down the system using the command line "shutdown.exe -p -f".
19	GetSoftware	Handled by the helper DLL, which opens a specified registry key in the HKLM hive and enumerates its sub keys looking for "DisplayName" and gathers all software packages that do not have "Hotfix", "Security Update" or "Update for" within their "DisplayName". It responds to the C2 with a list of software packages delimited by the string "|A|".
21	unistallSoftware	Handled by the helper DLL, which enumerates the "Software\Microsoft\Windows\CurrentVersion\Uninstall" registry key looking for the software package provided with the command and will uninstall it. It responds to the C2 with "Unistall is running" if successful or the exception if it fails.
22	GetDriver	Handled by the helper DLL, which enumerates the mounted storage devices, their total size and the available space left on them. The command concatenates this information into the following structure and sends it to the C2: "<drive number>|H|<drive's total size>/<drive's available space>|Q|". For systems with multiple mounted storage volumes, the command will concatenate the additional data following the same structure above.
23	GetFiles	Handled by the helper DLL, which lists the contents of a directory of a provided path. Each folder in the directory are added to a string, which is sent to the C2 in the a format of "<folder name>|G|Floader|G||G|<provided path>|H|". Each file in the directory are added to a string that is sent to the C2 in the format of "<filename>|G|<file extension>|G|<file size>|G|<provided path>|H|".
24	SearchFolder	Searches the filesystem for a specified folder. If it finds the folder, the Trojan will enumerate its contents using the same code as the "GetFiles" command.
25	RunFile	Starts a process using a specified file. Does not respond to the C2 with any messages.
26	DeleteFile	Deletes a specified file. If the command has "E" switch provided, it will delete a specified directory and all of its contents.
27	RenameFile	Renames a specified file. If the command has "A" switch provided, it will rename a specified directory.
28	DownloadTCP	Reads a specified file and sends it to the C2 server.
29	UploadTCP	Writes data provided by the C2 to a specified file.
30	DownloadURL	Downloads a file from a specified URL. The C2 will provide the URL to download from in the format "<domain or IP>|A|<filename>|A|<file extension>|A|<path/URL>".
31	RefreshLog	Sends the contents of the log file at "C:\bootloader.dec" to the C2 server.
32	ClearLog	Deletes the log file at "C:\bootloader.dec" from the system.
36	MonitorCounts	Uses the GetSystemMetrics API function to determine how many monitors are connected to the system.
37	PcBounds	Sends the height and width of a specified monitor to the C2.
38	ShortLinkFolder	Lists the contents of a special folder based on a value between 1 and 4: 1) Lists Desktop 2) Lists %TEMP% folder 3) Lists Cookies Folder 4) Lists My Documents folder

Some of the values within the previously mentioned enumeration are not within the command handler. Unit 42 found only two of these specific values and found in the malware, specifically "Pipe" and "Status", which were used in network communications to designate the type of response the Trojan was sending to the C2. It does not appear that uWarrior uses the “Plugin”, “ErSoftware”, “RemoteDesktop”, “UnblockEverything”, “BlockEverything” values from within the enumeration, suggesting that the malware author did not remove these values from the enumeration even though their functionality was removed from the Trojan.

No Honor Amongst Thieves

Unit 42 researchers' examination of uWarrior has led to the discovery of suspected progenitor samples. These samples, identified as the for-sale ctOS RAT, contain similar configuration structures and share several functions with uWarrior samples. The ctOS RAT contains a significant amount of functionality compared to the uWarrior command set, suggesting that uWarrior could be a stripped down alternative.

uWarrior's configuration contains all of the same fields as ctOS, as well as an additional field (bool_2 in GStruct2 stucture in Figure 4), used to toggle whether "warrior.dat" should be utilized to store the path on the file system to the executable. Samples of both RATs contain a GUID field (string_2 fields in Figure 4), "TEST", which is used to define the path where the executable will be dropped.

Figure 4 Comparison of uWarrior (GStruct2) and ctOS (Struct4) Configurations

In addition to sharing similar configurations, it appears that the uWarrior author borrowed code from the ctOS RAT. uWarrior’s helper DLL (used to handle several of uWarriors functionality) has two functions that directly overlap with functions from ctOS source code, specifically one that gets the size of a specified file and the second that enumerates the mounted storage volumes.

Static analysis of ctOS and uWarrior samples reveals Italian language strings. These Italian strings are part of PDB paths and are prevalent throughout .net manifest data. This lends additional strength to the linkage between ctOS and uWarrior, as the former's control panel demos are also in Italian.

Palo Alto Networks WildFire identifies the exploit files and malware used in these attacks as malicious. Palo Alto Networks AutoFocus users can view the analysis related to these files using the uWarrior tag.

Indicators

Sample Hashes

WindowsUpdate.exe,5dce01ec5e1bc1b4f5012e0b4bf16532206284fc8c64cfb8dcf907f45caf98fc

Windows_Update.UtilityWarrior.dll,f4aa83297844eb8297711e32554e41f677cce290732171583199a57fb7a0674b

ammendment.doc, a6dea088c9e2c9191e4c2fc4ece7b7b7bd3f034f444362d35c8765f6ec4bd279

WUPOS_update.doc, 57a5d0da72655df9c5ca9137df7210b86845eeabae488537c70e36587274937c

File system indicators

%AppData%\Local\Temp\bootloader.dec

%AppData%\Roaming\warriors.dat

Network indicators

login.collegefan.org

login.loginto.me

63.142.245.12

23.249.225.140